Beno J. Gundlach

Grouting Float

#43 These floats feature a 100% gum rubber face for long wear. The gum rubber face is bonded to a dense foam rubber pad and one end has both corners rounded. For use on walls and floors. This popular float has a sanded hardwood handle and an aluminum backing plate. Pad measures 4" wide x 9-1/2" long x 3/4" thick.

Toe-Space Grouting Float

#44 These floats feature a 100% gum rubber face for long wear. The gum rubber face is bonded to a dense foam rubber pad and one end has both corners rounded. For use on walls and floors. Offset handle and narrow pad permit easier horizontal and vertical grouting in toe space areas such as under kitchen cabinets and vanities. The long wearing 100% gum rubber face is bonded to a dense foam rubber pad. The extra thick aluminum backing resists bending. Handle is offset 3" from one end to allow easy and complete access to toe space areas. Can also be used for field grouting. Has a sanded hardwood handle. Pad measures 3" wide x 12" long x 3/4" thick.

Green Gum Float

#GK-1 These floats are made of 100% gum rubber for long wear on epoxy grout cleanup work. Can also be used with sanded grouts, and the rubber edges can be sanded to maintain their original sharpness. Both have a sanded hardwood handle and pads measure 4" wide x 10-1/2" long x 1/2" thick. This float has a hard gum rubber pad with the Mar-Less molded in aluminum backing plate.

Ceramic Tile Nippers

#80 These nippers are 8" long, have carbide tipped jaws, handle stops, plastic handle grips and convenient coil spring reopening action.Has offset "side biter" 5/8" straight jaws.

Glass & Porcelain Tile Nippers

#55W2 Professional tile nibbler specifically designed for glass and ceramic mosaics. This tool is extremely useful for making classic and artistic mosaics, small finishing touches for angles, special shapes. Made of carbon-alloy steel and forged with the latest technology, it combines excellent finishing and precision with a slim line that makes it ergonomic and well-balanced. The tool has two tungsten carbide cutting wheels with titanium nitride coating. The highly effective lever combined with the concentrated points of contact between the material and the cutting edges guarantees extremely high cutting forces and accurate results. This means that the tool can also be used on vitreous mosaics and high finishing of cuts.

Caulking Gun

#101 This smooth rod gun has a slotted front cap design that prevents cartridge shifting and a thumb release to stop adhesive flow. Gun is ribbed for strength and features all steel welded construction and a 10:1 thrust ratio.

Seam Squeezer

#180 Make perfect seams on cushion back carpet with the help of this tool. Powerful spring squeezes equally from both sides to give the necessary tension during adhesive open time. Spring tension is adjustable as needed. Slanted pins in the 2-5/8" wide gripper plates prevent slipping. Excellent for repair work. Sold two per set.

Undercut Saw

#336 Undercuts door jambs and other wall base obstacles. Eliminates intricate fitting work. Specially shaped 12" long blade permits right or left hand cutting. The comfortable wood handle is sufficiently offset to provide knuckle protection. Supplied with a small knob for optional use (in place of the front wing nut) for two handed sawing. Replaceable blade is made from high carbon saw steel, and has 10 points per inch.

Hacksaw Frame

#80951 A sturdy, economically priced hacksaw frame with a 4" cutting depth. Steel parts are corrosion proof chrome plated. Die cast zinc handle has a pistol grip design and a black powder coat finish. Uses 10" or 12" blades. Weighs just over 1 lb. and is supplied with a high carbon steel blade, 10" long.

Two Finger Vacuum Lifter

#3825 Will hold up to 20 lbs. Convenient tabs allow easy vacuum release. Cup diameter is 3-1/4".

Rub Brick, Rectangular

#422 This double faced rub brick has a 60 grit on one side for dressing the clay biscuit, and a 90 grit on the other side for smooth finishing of the glaze. Measures 2" wide x 6" long x 1" thick. Silicon carbide abrasive (black color) for economy and longest rub brick life.

Rub Brick, Round

#444 This round, double faced rub brick has a 60 grit on one side and a 90 grit on the other side. Round style allows for even wear of the stone. Measures 4" diameter x 1" thick. Silicon carbide abrasive (black color) for economy and longest rub brick life.

Rub Brick with Handle

#BFH-6 Used for leveling spots on concrete and masonry work before setting tile. This long wearing brick is made of silicon carbide abrasive. Has a fluted surface with a fast cutting 20 grit. Stone itself measures 3" wide x 6" long x 1" thick.

Quick Curb

#455 The Quick Curb™ is a stay-in-place plastic form that makes it possible to build a 4' shower curb in less than 6 minutes. To install, simply set the Quick Curb in place, fill with mortar and you are ready for tile. Curbs have molded in dovetail connecting lugs for multiple length installations, and can be easily cut to the proper length with a hacksaw, snips or utility knife. The top radius and the legs of the Quick Curb can be snapped off to provide any of the configurations shown below. Each Quick Curb has two pan hangers to hold the liner in proper position. Quick Curbs minimize tile cutting, and also eliminate problems with lack of straightness and moisture associated with custom made wood curbs. Quick Curbs are 5" wide x 24" long x 6-1/4" high. Supplied with illustrated instructions. Not designed for use over wood curbs.

Quick Pitch Standard Kit

#QPK-101 For standard 36" x 60" shower areas with a centered drain, or custom shower areas where the drain is within 36" of each wall. Included in each package is one each Center Ring and 6 each Standard Float Sticks (1" to 1-3/4" taper x 36" long) that attach in any of the 24 slots on the Center Ring.

White Rubber Mallet

#350-2W Used by carpet installers and ceramic tile setters. This top quality mallet provides longer service than lower cost, lesser quality models. Has a sturdy hardwood handle and non-marking white head.

Eggbeater Mixer

#EB30 This eggbeater style mixer is designed to mix thinset mortar, grout and other powdered materials. It has sturdy all steel welded construction and is plated for rust protection. Its 30" overall length allows for use without stooping. The stiff, solid 7/16" hexagonal steel shaft won't bend from use in heavy mixes, nor slip in the drill chuck. Measuring 5-1/4" wide x 4-3/4" high, the 3/8" round steel paddles provide thorough mixing rotation to eliminate splashing and lumps or air in the mix. Weighs 2-1/2 lbs.

Positive Weep Hole Protector

#PWP-106 This patented clear plastic drainage disk is for placement around a drain opening in a shower floor. Designed to be positioned between the floor pan and the mortar laid over the floor pan. The ridges of the Positive Weep Hole Protector allow for drainage of water to the weep holes in the drain receptor. Helps prevent water from sitting between the shower pan liner and mortar bed. The inner and outer diameter of the disk are perforated to allow for customization depending on shower drain size.

Grout Saw

#GS50 Used for removing ceramic wall tile grout, this saw has a replaceable 2" long blade that is tipped with tungsten carbide grit for fast cutting and long life. Blade is approximately 1/16" wide. For wider joints, two blades can be mounted on either side of the handle. Plastic handle tool is 7" long.

Grout Bag with Hard Metal Tip

#517 These cone shaped grout bags, designed to provide for smooth flow of grout, make easy and efficient work of grouting small or large jobs. Both bags are easily cleaned for repeated use. Made from heavy gauge vinyl, this bag measures 12" wide x 22" long. Supplied with a No. 517-RT Tip.

8" Blend Duster Brush

#2638 A blend of horse hair and plastic bristles that give excellent service life. Trim depth is 2-1/2". Has a Beavertail style wood handle with a hang hole and is 13-1/2" long overall.

8" Plastic Tile Brush

#61-TB This 8" model has a 12-1/2" long beaver tail style lightweight wood block. Trim depth is 2-1/2". Has special plastic bristles with 'exploded' tips for cleaning of dried grout film from ceramic tile. Leaves a bright polished appearance on glazed tile.

Water Heater

#2150SS Will heat one gallon of room temperature water to 90°F in approximately 10 minutes. Draws 10 Amps, has 1,150 watts of power and operates on 120V through a 5' 18/3 wire grounding type cord with a molded plug. Includes a 60 day limited warranty from manufacturing defects. Operation in anything but clean, clear water, or above maximum water level, constitutes misuse, and voids the warranty. Maximum water level is 5-1/2". U.L. Listed.

Red Chalk (8oz Bottle)

#8-R A specially formulated blend of talcum powder and limestone is milled to a finer consistency for more positive and distinct marking.

Adjustable Tile Support System (2/Set)

#ATLAS Adjustable, spring-loaded supports for accurately positioning large format slabs on a tile cutter's cutting surface. Each package includes two spring-loaded Atlas supports. Adjustable for both height and weight. Height can be set from 2" to 3-1/4". Made of fully recyclable ABS.

Super Soft Knee Pads

#209 These knee pads are made of 100% washable neoprene and have a super-soft contoured foam rubber pad insert for greater comfort. The front of this knee pad and strap is coated with polyurethane for increased durability and water resistance and will not mark or scratch floors. Quick and easy on/off using the single 3" wide front fastening Velcro® strap. Nonbinding straps fit below the knee and prevent chafing, allowing these knee pads to be worn with shorts.

Super Soft XL Leatherhead Knee Pads

#209-xl-l These knee pads are made of 100% washable neoprene and have an extra large super-soft contoured 3/4" thick foam rubber insert pad for greater comfort. The front of this knee pad and strap is covered with tough leather for increased durability and will not mark or scratch floors. Quick and easy on/off using the single 3" wide front fastening Velcro® strap. Nonbinding straps fit below the knee and prevent chafing, allowing these knee pads to be worn with shorts.

Ultralight Knee Pads

#KN-1 Comfortable and lightweight, each pad weighs less than 10 oz. Accordion fold gives maximum comfort and flexibility in both standing and kneeling positions. Tough outer shell has a nonskid surface. Has a soft inner pad insert for comfort. Keyhole slotted black rubber straps allow quick on/off.

8" Long Big Scrapers

#375 Scrape faster and work less with a razor sharp 8" blade. Length is adjustable from 39" to 59" for maximum comfort whether kneeling or standing. Adjustment is quick and easy. Each scraper has a comfortable vinyl grip and four case hardened screws to resist slot wear and give maximum blade holding power. Supplied with one 8" blade, installed backwards for safety. Replacement blades are available. Not recommended for heavy duty prying floor removal work.

Short Big Scraper with Vinyl Hand Grip

#375S Scrape faster and work less with a razor sharp 8" blade. Length is adjustable from 19" to 29" for maximum comfort and efficiency. Adjustment is quick and easy. Each scraper has a comfortable vinyl grip and four case hardened screws to resist slot wear and give maximum blade holding power. Supplied with one 8" blade, installed backwards for safety. Replacement blades are available. Not recommended for heavy duty prying floor removal work.

Carbide Wheel

#MSW-3 Replacement scoring wheel for Ishii tile cutter models CT-1, M-14TC, MC-14, MC-500, MC-600 and similar.

Carbide Scoring Wheel

#400 This 1/2" diameter wheel gives easier, deeper scoring on harder tile and stays sharp longer. Fits all Superior and Crain models, except the Crain No. 045X.

Carbide Tipped Steel Blade, 5-5/8"

#556 This 36-tooth, 5-5/8" diameter Carbide Tipped Steel Blade is bell shaped for flush cutting wood and added rigidity.

Carbide Tipped Steel Blade

#804 Blades are available in combination steel, carbide tipped steel and masonry cutting types. Combination steel blades have more teeth for smooth cuts, while carbide tipped blades have longer life.

Carbide Tipped Steel Blade, 6-1/2"

#821 This 6-1/2" diameter blade is for undercutting wood. Carbide tipped for long life. Use with No. 812 Super Saw or No. 820 Heavy Duty Undercut Saw.

Rotary Carbide Wheel

#C-RW Replacement scoring wheel for Ishii tile cutter models CT-1R, MC-500R, MC600R, MC-700R and similar.

3/32" Wide 3/4-Moon Carbide Blade (63502118210)

#SL-118 This Carbide Blade is excellent for general degrouting of tile joints. The blade generates no airborne dust and is "tile safe" since the oscillation action does not cause the blade to climb out of the tile joint like other tools. The blade is flat to allow flush degrouting and the 3/4-moon shape allows working deeper into corners. The blade is 3" diameter and cuts up to 1/2" deep. Cutting width is about 3/32". Not intended for epoxy grout removal or for cutting ceramic tile or stone.

Alumina Rotary Carbide Wheel

#22XA Replacement scoring wheel for Ishii tile cutter models AH-870S2, AH-1040S2, JP-560STW, JP-630STW, JP-700STW, MX480S and similar.

24-3/4" Deluxe Big Clinker Cutter

#JP-630STW This cutter has a four-position scoring height adjustment knob to allow scoring and cutting of tiles up to 3/4" thick. Sheet mounted mosaic tiles are easily cut by scoring all tiles, raising the wheel position and then individually breaking each tile. Cutter has 20 mm diameter dual chrome plated steel bars that are heat treated for longest life, a 4-3/4" wide breaker foot and a 12" wide protractor gauge (No. JP-570X-11P). Makes 24-3/4" straight cuts 17-1/2" diagonal cuts. Cutter weighs 22 lbs.

27-1/2" Deluxe Big Clinker Cutter

#JP-700STW This cutter has a four-position scoring height adjustment knob to allow scoring and cutting of tiles up to 3/4" thick. Sheet mounted mosaic tiles are easily cut by scoring all tiles, raising the wheel position and then individually breaking each tile. Cutter has 20 mm diameter dual chrome plated steel bars that are heat treated for longest life, a 4-3/4" wide breaker foot and a 12" wide protractor gauge (No. JP-570X-11P). Makes 27-1/2" straight cuts 19-1/2" diagonal cuts. Cutter weighs 24 lbs.

19" Power Clinker Tile Cutter

#MX-480S This cutter has a has 16 mm diameter dual chrome plated steel bars, a 3-1/2" wide breaker foot and a 8" wide protractor gauge (No. MX-470X-11P). Makes 19" Straight cuts and 13-1/2" Diagonal cuts. Weighs 15 lbs.

8" Protractor Gauge

#MX-470-11P Replacement 8" protractor gauge for the Ishii No. MX-480S tile cutter.

Ceramic Tile Cutter

#1A-400 These cutters are made from sturdy cast aluminum alloy and steel for heavy duty service. They score and cleanly break tile and trim pieces without moving the material. All models have the famous "A" Handle with spring tension to provide automatic adjustment to the breaker bar for straight cuts every time. Cuts tile up to 6" straight and 4-1/4" diagonally. Has a 6" working table on both sides of the breaker bar. Has an angle gauge, and No. 1A-400 has a No. 400 Carbide Scoring Wheel. Is 12" x 12" overall.

Ceramic Tile Cutter

#3-400 These cutters are made from sturdy cast aluminum alloy and steel for heavy duty service. They score and cleanly break tile and trim pieces without moving the material.

2-3/8" Extend-O-Drain #2375

2-1/2" - 3" Extend-O-Drain #2500

3-3/8" Extend-O-Drain #3375

4-3/8" Extend-O-Drain #4375

Give your tile floor a finished look by raising low drain screens with these extensions. Each kit includes a 1/4" thick plastic drain height extension piece, three rubber washers, screws and brief instructions. Additional kits can be used for drain screens that need to be raised more than 1/4".

9" Economy Trowel

#1022-CWM For do-it-yourself or disposable use. Has a float style plastic handle that gives a sure grip and provides a stiff back for the 4" x 9" carbon steel blade. 1/4 x 3/16 V-notches.

11-1/2" Professional Ultigrip Trowel - 1/4" x 1/4" SQ Notch

#9CTB-U The Professional Trowel has a 4 1/2" wide x 11-1/2" long high carbon bright spring steel blade for maximum life. 1/4" x 1/4" Square-notches.

11-1/2" Professional Ultigrip Trowel - 1/4" x 3/16" V-Notch

#9CWM-U The Professional Trowel has a 4 1/2" wide x 11-1/2" long high carbon bright spring steel blade for maximum life. 1/4" x 3/16" V-notches.

11-1/2" Professional Ultigrip Trowel - 3/4" U-Notch

#9MSM-U The Professional Trowel has a 4 1/2" wide x 11-1/2" long high carbon bright spring steel blade for maximum life. 3/4" U-notches.

11-1/2" Professional Ultigrip Trowel - 1/4" x 3/8" SQ-Notch

#9QT-U The Professional Trowel has a 4 1/2" wide x 11-1/2" long high carbon bright spring steel blade for maximum life. 1/4" x 3/8" Square-notches.

FAJ Diamond Drill Bit Kit

#FAJVA-N Kit includes 1 of each of the following: #FAJ05 3/16" (5 mm) Diamond Drill Bit; #FAJ06 1/4" (6 mm) Diamond Drill Bit; #FAJ08 5/16" (8 mm) Diamond Drill Bit; #FAJ10 3/8" (10 mm) Diamond Drill Bit; and #FAJ12 1/2" (12 mm) Diamond Drill Bit.